Unlock your iPhone for free

Step 1 "
You are requested to ensure that your new machine to upgrade to the 1.0.2 version!
Check your version Settings → General → About → Version, you will see 03.14.08_ G. it right.
Note: You must ensure that the iTunes 7.3 version, if you have to upgrade to 7.4 or 7.41, you have to copy 7.3 of the iBrickr iTunesMobileDevice.dll document in the folder.
Choice Files with iBrickr find / usr / libexec / lockdownd this folder to copy into. Then re-starting your iPhone. It will be activated.
Note: If you have already used other methods activated iPhone, we should also get lockdownd replication)
Now to your iPhone connect to your computer using Wi-Fi. Your iPhone installed Wi-Fi in the Settings → → Your Wi-Fi network. Note of your iPhone then the IP address. Would also like to switch off the automatic locking. Settings → General → Autolock election Never.

We also passed iBrickr assembly and the election Applications → Browse applications. Us first installed Installer.装完, remember upgrade Installer. Then loaded by Installer

Community Sources
BSD Subsystem (may spend some time)
OpenSSH

Installed later iBrickr open / usr / bin / this folder (method ibid.). Copy of the following documents into the
IUnlock ICE03.14.08_G.fls nor minicom bbupdater then returned to / usr / folder, create a new folder called local. When you entered the / usr / local / folder and then create a new folder called etc. . now in your / usr / local / etc / folder. you put into minirc.dfl replication.
Step 3:
Using PuTTY connecting computers and iPhone in the SSH. IP Address your input. User name is root password is dottie
Then enter the following command
Cd / usr / bin / carriage return
Chmod + x bbupdater round
Chmod + x iUnlock round
Chmod + x minicom round
Launchctl unload-w / System / Library / LaunchDaemons / com.apple.CommCenter.plist round
IUnlock ICE03.14.08_G.fls nor round
Then there will be a percentage!
Up to 100%
Note: If you fail, the other from your iPhone re-re-importation of the order again, if you will lose weight from the Wi-Fi function.
The success of the importation order tests
Bbupdater-v carriage return (in the back of #)
Displayed
# Bbupdater-v
Resetting target ...
Pinging the baseband ...
Issuing + xgendata ...
Firmware: DEV_ICE_MODEM_03.14.08_G
Eep version: EEP_VERSION: 207
Eep revision: EEP_REVISION: 7
Bootloader: BOOTLOADER_VERSION: 3.9_M3S20
Done
If you see a xgendata appeared to prove successful.

Below import orders minicom
You will see l "
Welcome to minicom 2.25

OPTIONS:
Compiled on Jul 21 2007, 05:09:51 ..
Port / dev / tty.baseband

Press CTRL-AZ for help on special keys + Q4 F5 c3 l) Z Z4 N8 T $ X 's

AT S7 = 45 S0 = 0 L1 V1 X4 & c1 E1 Q0
OK

Now then enter the importation AT
It will OK the word
Now import orders
AT + CLCK = "PN", 0, "00000000" carriage return
Be OK
Then the order
AT + CLCK = "PN", 2
There
+ CLCK: 0

(If there is error, in the next bbupdater-v done once)
Minicom switch off at the same time according to a press ctrl + q, and then the election YES